【单选题】【消耗次数:1】
If you work hard, you will be ________; but if you don’t, you will be punished.
relaxed
relieved
reduced
rewarded
参考答案:
复制
纠错
相关题目
【单选题】 I must____________ you that if you do this again you will be punished.
①  waste
②  worry
③  warn
④  weep
【单选题】 _______ hard work, you don’t have much chance of success.
①  After
②  Without
③  With
④  Before
【单选题】 You don’t mind ______ you Xiao Li, do you?
①  call
②  to call
③  to calling
④  my calling
【单选题】 You have to work hard if you want to __________ in your courses.
①  achieve
②  succeed
③  win
④  beat
【单选题】 You need money and time. _____________, you need to work hard.
①  In addition
②  such as
③  In a word
④  For instance
【单选题】 Work hard, _________ you will fail in the exam.
①  if
②  or
③  and
④  but
【单选题】 If you want children to work hard you must _____their interests instead of their sense of duty.
①  appeal to
②  look into
③  give rise to
④  go in for
【单选题】 _____ you work hard enough _____ you be able to get a PhD degree in three years.
①  Only if, will
②  If only, would
③  Should, will
④  Unless, would
【单选题】 If you don’t go, ____ I.
①  nor shall
②  so don’t
③  neither do
④  so do
【单选题】 If you _____ hard, you _____ in the exam.
①  worked/ wouldn’t have failed
②  had worked/ wouldn’t fail
③  had worked/ wouldn’t have failed
④  worked/ wouldn’t fail
随机题目
【单选题】 采用分组选择装配法以保证产品的装配精度。故在装配过程中应选择()组的零件进行装配,以保证每组的零件装配后都能到达装配精度。
①  调整
②  任意
③  对应
④  中间
【单选题】 切削用量及切削刀具不变的条件下,连续完成的部分工艺过程,可称之为()。
①  工序
②  工步
③  安装
④  走刀(或操作)
【单选题】 切削加工时,由于塑性变形,表层金属的强度和硬度都得到了强化,这种现象被称为()
①  误差复映;
②  热胀冷缩;
③  冷作硬化;
④  磨削烧伤。
【判断题】 磨削机床导轨面时,以导轨面自身作为定位基准,以保证磨削余量均匀。
①  正确
②  错误
【判断题】 为提高铜合金零件加工质量,常采用磨削加工方法来达到目的。
①  正确
②  错误
【判断题】 在装配尺寸链中,封闭环一般是指装配精度要求。因此,在修配装配法中,修配环就是尺寸链的封闭环。
①  正确
②  错误
【判断题】 通常定义误差敏感方向是指通过刀刃的加工表面的法线方向,所以,在此方向上,原始误差对加工误差的影响最大。
①  正确
②  错误
【判断题】 由于积屑瘤能代替切削刃进行切削,减小塑性变形及刀具的磨损,因此,积屑瘤的产生对粗加工切削过程是有利的。
①  正确
②  错误
【单选题】 在大批量生产条件下,若装配精度要求高?参入装配的组成件较少,此时应选择()装配方法?
①  完全互换
②  修配
③  分组选择
④  调整
【单选题】 采用分组选择装配法以保证产品的装配精度?故在装配过程中应选择()组的零件进行装配,以保证每组的零件装配后都能到达装配精度?
①  调整
②  任意
③  对应
④  中间