【判断题】【消耗次数:1】
This book is better than that one.
正确
错误
参考答案:
复制
纠错
相关题目
【单选题】 This book is ________ that one. But __________ than that one.
①  as difficult as ;expensive
②  as more difficult as ; more expensive
③  as difficult as ; more expensive
④  more difficult as ; as expensive
【单选题】 This book is ______ that one, but ______ than that one.
①  as difficult as; expensive
②  as more difficult as; more expensive
③  as difficult as; more expensive
④  more difficult as; as expensive
【单选题】 This book is_____that one. But______than that one.
①  as difficult as ;expensive
②  as more difficult as ; more expensive
③  as difficult as ; more expensive
④  more difficult as ; as expensive
【单选题】 3.This book is ____that one, but ____than that one.
①  as difficult as; expensive
②  as more difficult as; more expensive
③  as difficult as; more expensive
④  more difficult as; as expensive
【单选题】 This pencil is ______ than that one.
①  longest
②  long
③  longer
④  as long
【单选题】 7. This pencil is ____than that one.
①  longest
②  long
③  longer
④  as long
【判断题】 答题说明:句子没有语法错误请选择“正确”,有语法错误请选择“错误”This question is more difficult than that one.
①  正确
②  错误
【判断题】 答题说明:句子没有语法错误请选择“正确”,有语法错误请选择“错误”This road is wider two metres (米) than that one.
①  正确
②  错误
【单选题】 I like this jacket better than that one, but it costs twice ______.
①  as much
②  so much
③  that much
④  too much
【判断题】 答题说明:句子没有语法错误请选择“正确”,有语法错误请选择“错误”The new factory has produced (生产) more many cars than the old one.
①  正确
②  错误
随机题目
【单选题】 机电一体化技术是各种技术相互渗透的结果,下列技术不属于其主要相关技术的是( ?)。
①  自动控制技术
②  机械技术
③  检测传感技术
④  多媒体技术
【单选题】 放大电路引入电压串联负反馈,其输入电阻
①  增大
②  减小
③  不变
④  不一定
【单选题】 微倾式水准仪的基本操作步骤为?
①  照准调焦--安置、粗平--精平--读数
②  安置、粗平--精平--照准调焦--读数
③  照准调焦1--安置、粗平--精平--读数
④  安置、粗平--照准调焦--精平--读数
【判断题】 高速钢车刀的韧性虽然比硬质合金高,但不能用于高速切削。
①  正确
②  错误
【判断题】 主偏角增大,刀具刀尖部分强度与散热条件变差。
①  正确
②  错误
【判断题】 硬质合金按其化学成分和使用特性可分为钨钴类(YG)、钨钛钴类(YT)、钨钛钽钴类(YW)、碳化钛基类(YN)四类。
①  正确
②  错误
【判断题】 车削偏心工件时,应保证偏心的中心与车床主轴的回转中心重合。
①  正确
②  错误
【判断题】 机床坐标系和工件坐标系之间的联系是通过对刀来实现的。
①  正确
②  错误
【判断题】 工件在夹具中定位时,应使工件的定位表面与夹具的定位元件相贴合,从而消除自由度。
①  正确
②  错误
【判断题】 车内螺纹前的底孔直径必须大于或等于螺纹标准中规定的螺纹小径。
①  正确
②  错误