【单选题】【消耗次数:1】
She resorted to _____ when she had no money to buy foods for her children.
have stolen
steal
stole
stealing
参考答案:
复制
纠错
相关题目
【单选题】 She resorted to ____ when she had no money to buy foods for her children.
①  have stolen
②  steal
③  stole
④  stealing
【判断题】 She had her finger cut when she is paper-cutting.
①  正确
②  错误
【单选题】 It was not until she had finished all her work_____.
①  did she return
②  that she returned
③  when she returned
④  that did she return
【单选题】 When she was criticized, she claimed that it was outside her _____of responsibility.
①  field
②  limit
③  extent
④  range
【单选题】 She went to the bank to____________ her money.
①  call in
②  draw out
③  find out
④  suffer from
【单选题】 Lindas parents died when she was a baby, and she was __________ by her aunt.
①  turned into
②  raised up
③  grown up
④  brought up
【单选题】 It was not until she had arrived home __________ remembered her appointment with the doctor.
①  when she
②  that she
③  and she
④  she
【单选题】 _____ for the fact that she broke her leg, she might have passed the exam.
①  Had it not been
②  Hadnt itbeen
③  Was it not
④  Were it not
【单选题】 When she saw the clouds, she went back to the house to ____ her umbrella.
①  bring
②  fetch
③  take
④  carry
【单选题】 She happily deposits the money she has earned teaching English in her savings account. Find any misplaced modifier in the sentence
①  happily
②  she has earned
③  in her savings account
随机题目
【单选题】 孔的下极限偏差用( )表示
①  ES
②  EI
③  es
④  ei
【单选题】 直齿圆柱齿轮不反映圆的视图采用剖视图绘制时,轮齿按( )绘制
①  剖视图
②  不剖
③  剖视或不剖绘制均可
④  以上答案都不对
【单选题】 当只需要表达轴承的内孔直径、外圆直径、宽度和载荷特性,不需要表达结构特征时,可以采用( )画法
①  规定画法
②  特征画法
③  通用画法
④  简化画法
【多选题】 下面关于铸造零件的铸造圆角叙述正确的是
①  零件图上铸造圆角的尺寸必须标注
②  零件图上铸造圆角的尺寸不必标注,可以在技术要求中统一说明
③  铸造圆角可以省略不画
④  铸造圆角必须画出,不能省略不画
【多选题】 下面关于零件技术要求确定方法的叙述,正确的是
①  先根据零件的功能确定尺寸精度,再根据尺寸精度确定表面粗糙度,当尺寸精度能满足几何精度要求时,可以不提出几何精度要求
②  先确定零件精度最高的表面,然后再确定较低精度要求的表面
③  可以找一个类似的零件,参考类似的零件精度确定测绘零件的精度
④  以上方法都不对
【多选题】 下面关于测量外螺纹参数的方法正确的是
①  用游标卡尺测量大经
②  用压痕法测量螺距
③  用游标卡尺测量小经
④  用螺纹规测量螺距
【多选题】 某支架的材料牌号是HT200,下面关于该材料叙述正确的是
①  该材料属于灰铸铁
②  该材料的抗压强度是200Mpa
③  该材料的含碳量是0.2%
④  该材料的零件常常采用铸造毛坯
【多选题】 下面关于几何公差要求的确定方法,叙述正确的是
①  几何公差一般按尺寸公差的1/2至2/3提出要求
②  同一个表面位置公差应该大于形状公差
③  几何误差要是超出了公差范围,我们还不能断定该了解为废品,还要看几何公差与尺寸公差的关系等,才能确定是否为废品
④  以上3个叙述都不对
【多选题】 查阅相关的国家标准,检查下面手轮键槽深度、宽度的公称尺寸和上下极限偏差。下面关于键槽深度、宽度叙述正确的是<img src="https://mi-public.oss-cn-hangzhou.aliyuncs.com/mssvc/editor/image/2018/07/05/1530774515377165.bmp" title="1530774515377165.bmp" alt="t7-4 键槽5.bmp" style="max-width: 100%; max-height: 850px; white-space: normal;"/>
①  键槽宽度的公称尺寸不是5
②  键槽深度的公称尺寸不是16
③  键槽宽度的极限偏差不是±0.015
④  键槽深度的极限偏差不正确
【多选题】 某轮盘的材料牌号是Q235,下面关于该材料叙述正确的是
①  该材料属于碳素结构钢
②  该材料的含碳量在0.235%左右
③  该材料的抗拉强度是235Mpa
④  该材料的零件常常采用的热处理方法是“调质处理”