【单选题】【消耗次数:1】
Both sides agree to establish a _____ zone between the south and north.
midst
mild
mention
neutral
参考答案:
复制
纠错
相关题目
【单选题】 We are confident that relations between ?North Korea and South Korea _______ through further?? efforts to reduce the long-term hostile ?attitudes.
①  are being improved
②  will be ?improved
③  have been improved
④  are improved
【单选题】 About 60 percent of the students ___ from the south, the rest of them ___ from the north and foreign countries.
①  are/is
②  are/are
③  is/are
④  are
【判断题】 The slightest mention of the decade after the First World War brings nostalgic recollections to both the middle-age and the young.
①  正确
②  错误
【单选题】 establish a __________
①  new product
②  public company
③  sole trader
④  limited company
【单选题】 Lifelong learning is both formal and non-formal; and the boundaries between face-to-face teaching and ___________ education are increasingly blurred.
①  lifelong
②  formal
③  distance
④  far
【单选题】 Washington Irving’s_________ became the first work by an American writer to win financial success on both sides of the Atlantic in the first half of the 19th century.
①  Charles the Second
②  Sketch Book
③  The Scarlet Letter
④  Moby Dick I
【单选题】 The neutral word is [].
①  spinster
②  unmarried woman
③  maiden lady
【单选题】 The neutral word is [].
①  sly
②  clever
③  of high IQ
④  foxy
【单选题】 The neutral word is [].
①  tempting
②  charming
③  coquettish
【单选题】 The neutral word is [].
①  cocky
②  proud
③  arrogant
④  self-confident
随机题目
【判断题】 在装配尺寸链中,封闭环一般是指装配精度要求。因此,在修配装配法中,修配环就是尺寸链的封闭环。
①  正确
②  错误
【判断题】 通常定义误差敏感方向是指通过刀刃的加工表面的法线方向,所以,在此方向上,原始误差对加工误差的影响最大。
①  正确
②  错误
【判断题】 由于积屑瘤能代替切削刃进行切削,减小塑性变形及刀具的磨损,因此,积屑瘤的产生对粗加工切削过程是有利的。
①  正确
②  错误
【单选题】 在大批量生产条件下,若装配精度要求高?参入装配的组成件较少,此时应选择()装配方法?
①  完全互换
②  修配
③  分组选择
④  调整
【单选题】 采用分组选择装配法以保证产品的装配精度?故在装配过程中应选择()组的零件进行装配,以保证每组的零件装配后都能到达装配精度?
①  调整
②  任意
③  对应
④  中间
【单选题】 选择定位基准时,应遵循()原则,即设计基准与定位基准为同一个基准。
①  基准重合
②  基准统一
③  互为基准
④  自为基准
【单选题】 工件的装夹是指()过程的总和。
①  定位和加工
②  夹紧和加工
③  定位和夹紧
④  设计和加工
【单选题】 定位误差是由于工件在夹具或机床上定位不准确而引起的加工误差。当工件的工序基准与()不重合时,将会产生定位误差。
①  设计基准
②  测量基准
③  定位基准
④  装配基准
【判断题】 制造形状复杂的刀具一般宜选用硬质合金。
①  正确
②  错误
【判断题】 “一面两孔”常用作箱体零件的定位方式。
①  正确
②  错误