【单选题】【消耗次数:1】
I think science is ______ than Japanese.
much important
important
much more important
more much important
参考答案:
复制
纠错
相关题目
【单选题】 I think [填空] maths is more important than any other subject.
①  the
②  a
③  an
④  /
【单选题】 6. I think science is ____than Japanese.
①  much important
②  important
③  much more important
④  more much important
【单选题】 To answer correctly is more important than ____.
①  that you finish quickly
②  finishing quickly
③  to finish quickly
④  finish quickly
【单选题】 To answer correctly is more important than________.
①  that you finish quickly
②  finishing quickly
③  to finish quickly
④  finish quickly
【单选题】 8.To answer correctly is more important than____.
①  that you finish quickly
②  finishing quickly
③  to finish quickly
④  finish quickly
【单选题】 The greatest tragedy in life is not to lose too much,but care about too much,_________ is an important reason people are not happy.
①  who
②  that
③  what
④  which
【单选题】 27. For quite _____ students,their teachers advice is more important than _____ of their parents.
①  few;one
②  afew;that
③  alittle;some
④  alot;many
【单选题】 I don’ t think it’ s important, _____?
①  doesn’ t
②  is it
③  do I
④  isn’ t
【单选题】 Scarcely less important than machinery in the agricultural revolution was science.
①  A. 在农业革命中,科学没有机械重要。
②  B. 在农业革命中,机械没有科学重要。
③  C. 在农业革命中,科学和机械几乎同等重要。
④  D. 在农业革命中,机械和科学都不怎么重要。
【单选题】 Scarcely less important than machinery in the agricultural revolution was science.
①  [A]在农业革命中,科学没有机械重要。
②  [B]在农业革命中,机械没有科学重要。
③  [C]在农业革命中,科学和机械几乎同等重要。
④  [D] 在农业革命中,机械和科学都不怎么重要。
随机题目
【判断题】 几何不变体系一定是静定结构。()
①  正确
②  错误
【单选题】 对于坯料的流动方向与凸模的运动方向垂直的挤压工艺被称之为()
①  正挤压
②  反挤压
③  复合挤压
④  径向挤压
【判断题】 支反力影响线的影响线时,P=1在附属部分上移动,影响线在附属部分范围内成直线变化。()
①  正确
②  错误
【单选题】 磨削加工过程中,绝大多数的磨削热都传递给了()。
①  刀具
②  工件
③  切屑
④  周围介质
【单选题】 下面的叙述正确的是()
①  顺序凝固有利于防止铸造应力的产生
②  同时凝固有利于防止缩孔的产生
③  铸造时浇注温度越高越好
④  固态收缩是产生铸造应力的根本原因
【判断题】 一个杆系,在荷载作用下,即使略去杆件本身的弹性变形,它也不能保持其几何形状和位置,而发生机械运动的体系称为几何可变体系。()
①  正确
②  错误
【单选题】 应用卧式车床车削工件外圆表面时,其中车削运动的主运动由()来完成。
①  工件的直线运动
②  工件的旋转运动
③  车刀的直线运动
④  车刀的旋转运动
【单选题】 纯铜销轴外圆,长度为150mm,直径为φ50h7,Ra0.8μm,适合选择下列哪个加工方案:()。
①  粗车
②  粗车-半精车
③  粗车-半精车-精车
④  粗车-半精车-粗磨
【判断题】 两个刚片用三根不全平行也不交于同一点的链杆相联,组成几何不变体系,且没有多余联系。()
①  正确
②  错误
【判断题】 结构上点的移动和面或杆的转动称为变形。()
①  正确
②  错误