【判断题】【消耗次数:1】
We wish that you hadnt have such a lot of work, because we know you would have enjoyed the party.
正确
错误
参考答案:
复制
纠错
相关题目
【单选题】 We are going to have a singing party tonight. Would you like to join us?___________
①  I’m afraid not, because I have to go to an important meeting.
②  Of course not. I have no idea.
③  No, I can’t.
④  That’s all set.
【单选题】 We are going to have a dancing party tonight. Would you like to join us?
①  I’m afraid not. Because I have an appointment with my dentist tonight
②  Of course not. I have no idea
③  No, I can’t
④  That’s all set
【单选题】 A: We are going to have a housewarming party tonight. Would you like to join us? B: [填空].
①  I have no idea.
②  Im afraid not, because I have to visit my parents
③  No, I cant.
④  Thats all set
【单选题】 We’ll _____you as soon as we have any further information.
①  notify
②  signify
③  communicates
④  impart
【单选题】 —We all had a lot of fun at the barbecue ?yesterday. Pity you weren’t there. —I really should have gone with ?you but I _______ on some remaining problems.
①  worked
②  was working?
③  would work
④  would have worked
【单选题】 I wish to have a word with you, _____?
①  do I
②  don’ t I
③  may I
④  did I
【单选题】 At this stage we cannot tell you____ you have been selected for the job or not.
①  unless
②  although
③  whenever
④  whether
【单选题】 We cant [填空] because we dont have wings.
①  fly
②  flies
③  flying
④  flied
【单选题】 ________ you are leaving tomorrow, we can have dinner together tonight.
①  Since
②  While
③  For
④  Before
【单选题】 If you have never planted anything, you won’t be able to know the pleasure of watching the thing you have planted ____.
①  grow
②  to grow
③  growing
④  to be growing
随机题目
【单选题】 微型车 462Q 发动机缸盖螺栓的拧紧力矩为
①  3kgf.m
②  6kgf.m
③  8 kgf.m
④  10kgf.m
【单选题】 汽油机活塞裙部的膨胀槽一般开在工作行程中哪个部位的对面
①  受离心力最大处
②  受离心力最小处
③  受侧向力最大处
④  受侧向力最小处
【单选题】 曲轴主轴颈与主轴瓦的配合间隙用经验检查法: 用手拨动已按规定力矩拧紧在缸 体上的曲轴的曲柄, 曲轴应能靠惯性转动几圈为合适
①  0.25~0. 5 圈
②  1~1. 5 圈
③  0.5~1 圈
④  2~3 圈
【单选题】 在安装气缸盖时, 拧紧气缸盖螺栓正确的方法是
①  由中央对称地向四周按规定扭力分 2~3 次均匀拧紧
②  由中央对称地向四周按规定扭力一次拧紧
③  由四周对称地向中央按规定扭力一次拧紧
④  由四周对称地向中央按规定扭力分 2~3 次均匀拧紧
【单选题】 四冲程发动机在进行压缩行程时, 进气门和排气门
①  开、 开
②  开、 关
③  关、 开
④  关、 关
【单选题】 若气缸体为铸铁材料, 而气缸盖分别为铝合金和铸铁材料时, 正确安装气缸垫的方法为其卷边面应分别朝向
①  气缸盖、 气缸盖
②  气缸体、 气缸体
③  气缸盖、 气缸体
④  气缸体、 气缸盖
【单选题】 汽油机 4100Q 型发动机中表示气缸直径是
①  100mm
②  200mm
③  400mm
④  410mm
【单选题】 上止点是指活塞离曲轴回转中心
①  最远处
②  最近处
③  最高处
④  最低处
【单选题】 压缩比是指气缸( ) 的比值
①  气缸工作容积与燃烧室容积
②  气缸总容积与燃烧室容积
③  气缸总容积与气缸工作容积
④  燃烧室容积与气缸工作容积
【单选题】 下列发动机各缸可以互换的零部件是
①  各缸活塞连杆组
②  曲轴主轴承盖和连杆轴承盖
③  各缸进气门和排气门
④  各缸火花塞