【多选题】【消耗次数:1】
I doubt_____________ he will give me a good job.
if
what
where
whether
参考答案:
复制
纠错
相关题目
【单选题】 The Brownings have not ____ yet and I doubt whether they will come.
①  turned in
②  turned out
③  turned up
④  turned to
【单选题】 Most people give tips varying between 15 to 20 percent of the cost. Give a 15 percent tip to a waiter. Give him ( ) if he has done a good job.
①  much
②  some
③  less
④  more
【单选题】 I doubt whether the Chinese Football Team can win the game this time.____________
①  That’s true.
②  It’s hard to say.
③  I like the team.
④  I don’t believe it.
【单选题】 A: I doubt whether the Chinese Football Team can win the game this time. B: [填空].
①  Thats true
②  Its hard to say
③  I like the team
④  I dont believe it
【单选题】 What shall I ( ) to qualify for the job?
①  possess
②  prevail
③  persist
④  pertain
【单选题】 It is the ability to do the job_____ matters, not where you come from or what you are.
①  one
②  that
③  what
④  if
【单选题】 Please____ me whether I should accept the offer.
①  advise
②  suggest
③  propose
④  direct
【单选题】 I am _____hungry. Give me _______of milk.
①  a bit;a little
②  not a little;a bit
③  little;a bit
④  D. not a little; a little
【单选题】 No man is so foolish but he may give another good counsel sometimes.
①  A.没有人如此愚笨,他有时也能给别人提出好的忠告。
②  B.没有人愚笨到偶尔也给别人提出好的忠告。
③  C.人再愚笨,有时也能给别人提出好的忠告。
④  D.偶尔愚笨的人也能给别人提出好的忠告。
【单选题】 I intend to ______ a larger order if you give me a discount.
①  place
②  play
③  pose
④  pick
随机题目
【单选题】 在车削细长轴时,为了减小工件的变形和振动,故采用较大()的车刀进行切削,以减小径向切削分力。
①  主偏角
②  副偏角
③  后角
④  副偏角和后角
【单选题】 影响误差大小的主要因素是()。
①  主轴回转精度
②  导轨误差
③  传动链误差
④  测量误差
【单选题】 在主轴箱体的加工中,以主轴毛坯孔作为粗基准,目的是()。
①  保证主轴孔表面加工余量均匀
②  保证箱体顶面的加工余量均匀
③  保证主轴与其它不加工面的相互位置
④  减少箱体总的加工余量
【单选题】 当刀具的刃倾角为正值时,切屑流向工件的()。
①  已加工表面
②  待加工表面
③  垂直于加工表面
④  其它方向
【单选题】 既可加工铸铁,又可加工钢料,也适合加工不锈钢等难加工钢料的硬质合金是()。
①  YW类
②  YT类
③  YN类
④  YG类
【单选题】 已知一批零件的尺寸服从正态分布,则在加工误差统计分析中,6σ表示()。
①  实用分散范围
②  随机误差大小
③  工序加工精度的高低
④  前三者都表示
【单选题】 在机械加工工艺过程中安排零件表面加工顺序时,时效处理应安排在()。
①  精加工之后
②  精加工之前
③  粗加工之后
④  粗加工之前
【判断题】 有色零件的精加工应选择磨剂。()
①  正确
②  错误
【判断题】 切削加工一批零件时,如果对刀不准就会引起随机误差。()
①  正确
②  错误
【判断题】 小批生产多采用工序集中原则。()
①  正确
②  错误