【单选题】【消耗次数:1】
19. He tried to _____ from his memory what he knew of his former neighbor..
think of
remember
summon
gave way
参考答案:
复制
纠错
相关题目
【单选题】 He tried to _______relations with his former wife but he failed.
①  measure
②  maintain
③  shelter
④  reply
【单选题】 19. When he came to, he found himself _____ on a chair, with his hands _____ back.
①  to sit; tying
②  sitting; tying
③  seating; tied
④  seated; tied
【单选题】 The reason __he was absent from the meeting was _his car broke down on the way.
①  that; because
②  why; that
③  that; that
④  for; that
【单选题】 ____ he tried his best , he still failed the examination.
①  Although
②  Even although
③  However
④  Because
【单选题】 _______ he tried his best, he still failed the examination.
①  Although
②  Even although
③  However
④  Because
【单选题】 he tried [] but failed to finish his work in time.
①  hard
②  hardly
【单选题】 A few minutes later, Jim heard his name called. He knew it was his turn to be____________ .
①  examine
②  examines
③  examined
④  examining
【单选题】 He will surely finish the job on time _______ he is left to do it in his own way.
①  in that
②  in case
③  as far as
④  so long as
【单选题】 Although he did not know London well, he made his way ______ to the airport.
①  easy enough
②  enough
③  easily enough
④  enough easily
【单选题】 He []from his seat to greet the guests.
①  rose
②  raised
随机题目
【判断题】 乙类建筑应按本地区的设防烈度计算地震作用,同时按本地区的设防烈度采取抗震措施。()
①  正确
②  错误
【单选题】 结构类型外,还应该考虑()。
①  房屋层数
②  高宽比
③  房屋高度
④  地基土类别。
【单选题】 哪类结构应进行薄弱层的弹塑性变形验算?()
①  高层住宅建筑;
②  采用隔震和消能减震设计的建筑结构;
③  A级高度高层建筑;
④  平面布置不均匀的高层建筑。
【单选题】 当高层建筑结构采用时程分析法进行弹性时程分析时多条时程曲线计算所得结构底部剪力小于振型分解反应谱法求得的底部剪力的80%时,其底部剪力应按下列何值取用?()
①  至少按60%取用;
②  至少按70%取用;
③  至少按80%取用;
④  至少按90%取用。
【判断题】 平面外轴心受压承载力验算。()
①  正确
②  错误
【判断题】 在集中荷载作用下,剪力墙内无暗柱时还应进行局部受压承载力验算。()
①  正确
②  错误
【单选题】 高层建筑承受风力最大的地点()。
①  海岸边
②  田野、乡村、丛林、丘陵
③  房屋比较稀疏的乡镇
④  有密集建筑群的城市市区
【单选题】 预制梁需进行下列验算()
①  运输阶段
②  堆放阶段
③  吊装阶段
④  以上均验算
【单选题】 按弹性方法计算现浇单向肋梁楼盖时,对板和次梁采用折算荷载来进行计算,这是因为考虑到()
①  在板的长跨方向能传递一部分荷载
②  塑性内力重分布的影响
③  支座转动的弹性约束将减少活荷载布置对跨中弯矩的不利影响
④  施工的方便
【单选题】 框架结构设计中,梁端弯矩调幅的原则是()
①  在内力组合之前,将竖向荷载作用下的梁端弯矩适当减小
②  在内力组合之前,将竖向荷载作用下的梁端弯矩适当增大
③  在内力组合之后,将梁端弯矩适当减小
④  在内力组合之后,将梁端弯矩适当增大