【简答题】【消耗次数:1】
Translate the following sentence into Chinese.2. The Greens is very kind to us.
参考答案:
复制
纠错
相关题目
【简答题】 Translate the following sentence into Chinese.3. He came first in the race.
【简答题】 Translate the following sentence into Chinese.In fact, it has nothing to do with him at all.
【简答题】 Translate the following sentence into Chinese.Just show th clerk a piece of paper with my name written on it
【简答题】 Translate the following sentence into Chinese.Just show th clerk a piece of paper with my name written on it
【简答题】 Translate the following sentence into Chinese.The way of online learning will much benefit everyone at work in the long run.
【简答题】 Translate the following sentence into Chinese.These senior scientists have committed to the rapid development of the Air Force of China all their lives.
【单选题】 Mr. Zhang, _______ we have learned a lot, is very popular among us.
①  who
②  from that
③  from whom
④  whom
【简答题】 Translate the following sentence into ChinesePeople gain fortunes not only by hard labor but also by honesty.
【简答题】 Translate the following sentence into English.我刚到家电话就响了。
【简答题】 Translate the following sentence into ChineseRapid industrial growth makes new demands on science and technology.
随机题目
【单选题】 齿轮泵是液压系统中广泛采用的一种液压泵该说法( )
①  正确
②  错误
【单选题】 外啮合齿轮泵的工作原理:它由装在壳体内的一对齿轮所组成,齿轮两侧有端盖壳体、端盖和齿轮的各个齿间槽组成了许多密封工作腔。该说法( )
①  正确
②  错误
【单选题】 关于产生噪声的原因错误的表述是( )
①  泵的流量脉动和压力造成泵配件的振动
②  泵的工作腔从吸油腔突然和压油腔相通,或从压油腔突然和吸油腔相通时,产生的油液流量和压力突变,对噪声的影响小。
③  空穴现象
④  泵内流道具有截面突然扩大和收缩、急转弯,通道截面过小而导致液体紊流、旋涡及喷流,使噪声加大
⑤  由于机械原因,如转动部分不平衡、轴承不良、泵油的弯曲等机械振动引起的机械噪声。
【单选题】 降低噪声的措施( )
①  要增加液压泵内部油液压力的急剧变化
②  为吸收液压流量及压力脉动,可在液压泵的入口装置消声器
③  装在油箱上的泵应使用橡胶减振
④  压油管的一段用低压软管,对泵和管路的连续进行隔振
⑤  防止泵产生空穴现象,可采用直径较大的吸油管,减少管道局部阻力;采用大容量的吸油过滤器,防止油液中混入空气,合理设计液压泵,提高零件刚度。
【单选题】 液压缸按其结构形式,可以分为活塞缸、柱塞缸和摆动缸三类。该说法( )
①  正确
②  错误
【单选题】 活塞缸和柱塞缸实现往复运动,输出推力和速度。该说法( )
①  正确
②  错误
【单选题】 摆动缸则能实现小于360°的往复摆动。该说法( )
①  正确
②  错误
【单选题】 活塞式液压缸根据其使用要求不同可分为双杆式、单杆式两种。该说法( )
①  正确
②  错误
【单选题】 ( )是主要用来通过断油路或改变油液流动的方向,从而控制液压执行元件的起动或停止,改变其运动方向。
①  方向控制阀
②  压力控制阀
③  流量控制阀
【单选题】 在液压传动系统中,控制油液压力高低的液压阀称之为( )
①  方向控制阀
②  压力控制阀
③  流量控制阀