【单选题】【消耗次数:1】
20.______ she sings!
What beautiful
How beautiful
What beautifully
How beautifully
参考答案:
复制
纠错
相关题目
【多选题】 These are what they_______, they are so beautiful.
①  A.are fond of
②  B.like
③  C.love
④  D.hate
【单选题】 Mary, your dress is really beautiful. How is John?
①  Thank you very much
②  No, no, John is not bad
③  Thank you. He is fine
④  Don’t say that. It’s ugly. John is good
【单选题】 How I wish every family______ a large house with a beautiful garden!
①  had had
②  will have
③  had
④  has
【单选题】 __ she sings!
①  What beautiful
②  How beautiful
③  What beautifully
④  How beautifully
【单选题】 The gardens are beautifully _______
①  laid aside
②  laid down
③  laid off
④  laid out
【单选题】 5.It is not how much you read but what you read that really _________.
①  counts
②  loses
③  argues
④  widens
【判断题】 新闻六要素包括:what who when where why how。
①  正确
②  错误
【单选题】 I like the freedom of deciding where ( ) ,what to do and how long to stay.
①  goes
②  be going
③  to go
④  go
【单选题】 We are interested in the weather because it __________ us so directly --- what we wear, what we do, and even how we feel.
①  benefits
②  affects
③  guides
④  effects
【单选题】 Individual lines of the poem were very beautiful, but I didn’t see how the lines fit together. To me, the poem wasnt _____.
①  inherent
②  coherent
③  logical
④  corporate
随机题目
【单选题】 在交换机上划分VLAN后,属于不同VLAN的计算机( )。
①  同属一个冲突域,也同属一个广播域
②  同属一个冲突域,但不属一个广播域
③  不属一个冲突域,也不属一个广播域
④  不属一个冲突域,但同属一个广播域
【单选题】 根据IPv4协议规定,IPv4地址由( )位二进制数组成。
①  16
②  32
③  8
④  64
【单选题】 当URL中含有IPv6地址时,下面哪个是正确的表示( )。
①  http://[2000:1::1234:EF]:8080/cn/index.asp
②  http://{2000:1::1234:EF}:8080/cn/index.asp
③  http://2000:1::1234:EF:8080/cn/index.asp
④  http://[2000.1.1234.EF]:8080/cn/index.asp
【单选题】 如果要在路由器的FastEthernet0/0快速以太网端口上划分两个子端口,并分别设置IP地址,则创建子端口的配置命令为( )。
①  interface FastEthernet0/0/1
②  interface FastEthernet0/0.1
③  interface FastEthernet0/1
④  interface FastEthernet0/0/-1
【单选题】 根据光网络单元(ONU)位置不同,( )是光纤到路边/小区,为住宅区的用户提供服务。
①  FTTC
②  FTTH
③  FTTB
④  FTTD
【单选题】 ( )负责域名到IP地址的转换。
①  SNMP
②  DNS
③  TELNET
④  RIP/OSPF
【判断题】 立铣刀主要用于加工台阶面、平底槽,以及利用靠模加工成形面,也常用于加工二维凸轮曲面,该说法( )
①  正确
②  错误
【单选题】 标准麻花钻使用中存在的问题不包括( )
①  横刃前角小(负值),横刃且长,钻削轴向力大,定心差
②  主切削刃上各点前角相差较小
③  主切削刃长,切削宽度大,切屑卷曲困难,不易排屑
④  两条主刀刃不易磨对称,径向分力的合力易引起孔的直径加大或孔的直线偏斜
【单选题】 麻花钻用于轴类等零件端面上的中心孔加工,该说法( )
①  正确
②  错误
【单选题】 滚压螺纹属于无屑加工,适合于滚压塑性材料,该说法( )
①  正确
②  错误