【判断题】【消耗次数:1】
不同直径钢筋采用电渣压力焊时,应按直径较大的钢筋选择焊接参数。
正确
错误
参考答案:
复制
纠错
相关题目
【单选题】 当不同直径钢筋采用气压焊接时,两钢筋直径差不得大于:( )
①  3mm
②  5mm
③  7mm
④  9mm
【单选题】 对钢筋电渣压力焊的接头进行外观检查时,接头处的轴线偏移不得大于钢筋直径的 倍,且不得大于 mm。( )
①  0.1 ,2
②  0.1 ,4
③  0.2 ,2
④  0.2 ,4
【判断题】 采用电弧焊时,焊条直径主要取决于焊接工件的厚度。
①  正确
②  错误
【单选题】 截面配筋时如果采用两种不同直径的钢筋,其直径差至少应为( )。
①  4mm
②  3mm
③  2mm
④  1mm
【单选题】 钢筋的闪光对焊,对于断面不平整的大直径钢筋连接,宜采用()。(第五章知识点6闪光对焊)
①  连续闪光焊
②  预热闪光焊
③  闪光-预热-闪光焊
④  焊后热处理
【单选题】 对钢筋电渣压力焊的接头进行外观检查时,接头四周焊包凸出钢筋表面的高度应大于或等于:( )
①  2mm
②  3mm
③  4mm
④  5mm
【判断题】 钢筋套筒挤压连接技术不受钢筋可焊性的影响,适合于任何直径的变形钢筋的连结。
①  正确
②  错误
【单选题】 当其他条件完全相同时,根据钢筋面积选择钢筋直径和根数时,对裂缝有利的选择是( )。
①  较细的光圆钢筋
②  较粗的光圆钢筋
③  较细的变形钢筋
④  较粗的变形钢筋
【判断题】 电渣压力焊和闪光对焊比电弧搭接焊、绑扎搭接节约钢筋,受力合理
①  正确
②  错误
【判断题】 计算钢筋工程量时,无设计规定时,应计算电渣压力焊接头。
①  正确
②  错误
随机题目
【判断题】 答题说明:句子没有语法错误请选择“正确”,有语法错误请选择“错误”Only his father drives the new car on Sundays.
①  正确
②  错误
【多选题】 Tom_____________ a letter from his mother yesterday.
①  got
②  accepted
③  bought
④  received
【多选题】 Youd better_____________ that tyre now.
①  change
②  replace
③  cheat
④  repeat
【多选题】 These seats are_____________ for old and sick people.
①  seen
②  driven
③  kept
④  reserved
【多选题】 Suddenly,_____________ , a good idea came to her.
①  to her disappointment
②  to her great joy
③  to her surprise
④  to her delight
【多选题】 The river_____________ the two towns.
①  finds a way
②  keeps apart
③  separates
④  leads to
【多选题】 She expressed her opinions_____________ change their ideas.
①  so that
②  so as to
③  in order to
④  in order that
【多选题】 All the students in our school ____________ in the hall to hear a lecture.
①  collected
②  gathered
③  assembled
④  doubled
【多选题】 Isnt that picture_____________ too high on the wall?
①  puts
②  places
③  put
④  placed
【多选题】 This story_____________ a very brave (勇敢的) young girl.
①  is to
②  is about
③  concludes
④  concerns