【单选题】【消耗次数:1】
I won’t apply for the job. I hear that they’re quite ____ about their personnel.
particular
especially
special
peculiar
参考答案:
复制
纠错
相关题目
【单选题】 I _______ apply for the job, but I havent decided yet.
①  am going to
②  might
③  hope to
【单选题】 40.—I`m sorry I didn`t do a good job. ---Never mind.____you have tried your best.
①  Aboveall
②  Aboveall
③  Atall
④  Afterall
【多选题】 I doubt_____________ he will give me a good job.
①  if
②  what
③  where
④  whether
【单选题】 I won’t be able to attend the meeting tonight because _________ .
①  I must teach a class
②  I teach a class
③  I will be teaching a class
④  I will have been teaching a class
【单选题】 I don’t quite remember the key ____ the question though I answered it correctly.
①  of
②  to
③  for
④  about
【单选题】 I won’t make the _______ mistake next time.
①  like
②  same
③  near
④  similar
【单选题】 I don’t want to talk about it now. I’m not in the __________ .
①  feeling
②  attitude
③  emotion
④  mood
【单选题】 If only he __________ what I tell him, but he won’t.
①  had done
②  would do
③  would have done
④  has done
【单选题】 --I was quite surprised that I was elected as the chairman of the meeting.--________________________________
①  I think so.
②  You shouldnt surprise.
③  You are welcome.
④  You did an outstanding job and you really deserved it.
【单选题】 “I haven’t read ____ of the last four chapters, so I know little about them.”
①  something
②  some
③  any
④  anything
随机题目
【单选题】 制动时汽车方向稳定性不足现象是
①  制动时转向盘发抖
②  制动时汽车发生跑偏
③  制动时汽车产生异响
④  制动时汽车失去转向能力
【单选题】 制动时汽车跑偏的根本原因是
①  左右车轮制动力不相等
②  前束值不适当
③  路面附着力左右不一致
④  制动时车轮抱死
【单选题】 以下哪个原因会造成汽车的发动机在怠速工况发抖的情况
①  点火时间过快
②  空气滤清器堵塞
③  EGR系统出现了故障
④  喷油器喷油过多
【单选题】 技术师傅甲说:冷车起动就可以使用解码器马上检查氧传感器性能的好坏;技术师傅乙说:发动机起动后,要等到发动机温度超过60℃时,才能使用解码器检查氧传感器性能的好坏
①  甲说的对
②  乙说的对
③  甲乙说的都对
④  甲乙说的都不对
【单选题】 导致转向沉重的主要原因是
①  前束太大
②  外倾角太大
③  主销后倾角太大
④  转向半径不正确
【单选题】 对废气再循环控制系统的就车检查中,不存在以下哪个步骤
①  起动发动机,使发动机怠速运转
②  将手指按在废气再循环阀上,检查废气再循环阀有无动作
③  将车行驶到50km/h,检查汽车的尾气状态
④  在发动机热车(水温高于50℃)后再踩下加速踏板,使发动机转速上升至2000 r/min左右
【单选题】 当一部汽车出现机油压力低而报警的时候,做为司机的你,应该如何去做
①  快速开到附近的修理厂修理
②  办完手头上的事情后再去修理
③  过一段时间再去修理
④  马上安全停车并给修理厂打电话,寻求帮助
【单选题】 调整转向器啮合副啮间隙的目的是
①  调整方向盘自由行程
②  调整转向轮的最大偏转角
③  既调整方向盘自由行程又调整转向轮的最大偏转角
④  使两个前轮转向时的偏转角相同
【单选题】 以下哪个原因会造成汽车的发动机暖机时频繁失速
①  怠速控制阀有故障
②  水套侧盖衬垫损坏、螺钉松动或螺钉未按规定顺序紧固
③  机体上的水堵封水不严
④  在天气炎热或高原地区起动汽车
【单选题】 当水泵出现问题时,可用以下列哪种方法进行修理
①  当水泵轴承出现问题时,可单独更换轴承
②  水泵水封泄漏出现问题时,可单独更换水封
③  整体更换水泵
④  水泵叶轮出现腐蚀时,单独更换叶轮