【单选题】【消耗次数:1】
I caught a____ of the car before it disappeared around the bend.
glance
glimpse
look
see
参考答案:
复制
纠错
相关题目
【单选题】 I caught a___ of the car before it disappeared around the bend.
①  glance
②  glimpse
③  glare
④  stare
【单选题】 I went to the doctors yesterday. I had to wait for half an hour before he________see me.
①  can
②  may
③  might
④  could
【单选题】 I went to the doctor’s yesterday. I had to wait for half an hour before he ___ see me.
①  ?can
②  ?may
③  ?might
④  ?could
【单选题】 10. Far away around the corner I could see a small female ____advancing towards us.
①  body
②  figure
③  man
④  symbol
【单选题】 He looked around and caught a man ____ his hand into the pocket of a passenger.
①  ?put
②  ?to be putting
③  ? to put
④  putting
【单选题】 5. I went to the doctor’s yesterday. I had to wait for half an hour before he _____ see me.
①  can
②  may
③  might
④  could
【单选题】 He looked around and caught a man________his hand into the pocket of a passenger.
①  put
②  to be putting
③  to put
④  putting
【单选题】 7.He looked around and caught a man____his hand into the pocket of a passenger.
①  put
②  to be put
③  to put
④  putting
【单选题】 What is referred to if we say “see a movie, watch a play, look at a picture”?
①  denotative meaning
②  connotative meaning
③  collocations
④  synonyms.
【单选题】 That day he ___________ his clothes before he came to see me.
①  has washed
②  washed
③  had been washing
④  was washed
随机题目
【单选题】 液压系统运行初期的故障液压系统经过调试阶段后,便进入正常生产运行阶段此阶段故障特征是 ( )
①  管接头因振动而松脱
②  密封件质量好,或由于装配不当而破损,造成泄漏
③  管道或液压元件流道内的型砂、毛刺、切屑等污染物在油流的冲击下脱落,堵塞阻尼孔和过滤器,造成压力和速度很稳定
④  由于负载大或外界散热条件差,油液温度过低,引起内外泄漏,导致压力和速度的变化
【单选题】 液压系统中,工作压力不正常表现在工作压力建立不起来,或工作压力升不到调定值,致使液压系统不能正常工作,甚至运动件处于原始位置不动。该说法( )
①  正确
②  错误
【单选题】 液压系统温度过高,油液粘度显著下降,泄露加剧,液压泵及整个液压系统效率显著降低。该说法( )
①  正确
②  错误
【单选题】 气压传动系统若不经过处理而直接进入管路系统时,不可能造成的不良后果( )
①  油液挥发的油蒸汽聚集在气罐中形成易燃易爆物质,可能造成事故
②  油液被高温汽化后形成有机酸,对金属器件起腐蚀作用。
③  油、水和灰尘的混合物沉积在管道内将减小管道内径,使气阻增大或管路堵塞
④  在气温比较高时,水汽凝结后会使管道及附件因冻结而损坏,或造成气流不畅通以及产生误动作
⑤  较大的杂质颗粒会引起气缸、气马达、气控阀等元件的相对运动,而造成表面磨损,从而降低设备的使用寿命;或者堵塞控制元件的通道,直接影响元件的性能,甚至使控制失灵
【单选题】 ( )是气压系统的动力源装置。
①  气源装置
②  气压辅助元件
③  压缩空间站
④  空气压缩机
【单选题】 气缸常用的分类方法有( )
①  按压缩空气对活塞端面作用力的方向分
②  按气缸的结构特征分
③  按气缸的安装形式分
④  以上表述全正确
【单选题】 按压缩空气对活塞端面作用力的方向分为( )
①  单作用气缸
②  活塞式气缸
③  伸缩式气缸
【单选题】 换向型控制阀包括( )
①  气压控制阀
②  电磁控制阀
③  机械控制阀
④  以上说法都正确
【单选题】 关于气压控制换向阀按控制方式分类错误说法的是( )
①  机械控制
②  卸压控制
③  差压控制
④  加压控制
【单选题】 双作用缸有节流供气和节流排气两种调速方式。该说法( )
①  正确
②  错误