【单选题】【消耗次数:1】
She resorted to ____ when she had no money to buy foods for her children.
have stolen
steal
stole
stealing
参考答案:
复制
纠错
相关题目
【单选题】 She resorted to _____ when she had no money to buy foods for her children.
①  have stolen
②  steal
③  stole
④  stealing
【判断题】 She had her finger cut when she is paper-cutting.
①  正确
②  错误
【单选题】 It was not until she had finished all her work_____.
①  did she return
②  that she returned
③  when she returned
④  that did she return
【单选题】 When she was criticized, she claimed that it was outside her _____of responsibility.
①  field
②  limit
③  extent
④  range
【单选题】 She went to the bank to____________ her money.
①  call in
②  draw out
③  find out
④  suffer from
【单选题】 Lindas parents died when she was a baby, and she was __________ by her aunt.
①  turned into
②  raised up
③  grown up
④  brought up
【单选题】 It was not until she had arrived home __________ remembered her appointment with the doctor.
①  when she
②  that she
③  and she
④  she
【单选题】 _____ for the fact that she broke her leg, she might have passed the exam.
①  Had it not been
②  Hadnt itbeen
③  Was it not
④  Were it not
【单选题】 When she saw the clouds, she went back to the house to ____ her umbrella.
①  bring
②  fetch
③  take
④  carry
【单选题】 She happily deposits the money she has earned teaching English in her savings account. Find any misplaced modifier in the sentence
①  happily
②  she has earned
③  in her savings account
随机题目
【判断题】 铰链四杆机构如有曲柄存在,则曲柄必为最短构件。()
①  正确
②  错误
【判断题】 当机构的原动件个数等于机构的自由度的数目时,机构具有确定的运动。()
①  正确
②  错误
【判断题】 松螺栓联结时,螺栓只受拉应力作用。()
①  正确
②  错误
【判断题】 周转轮系的传动比等于各对齿轮传动比的连乘积。()
①  正确
②  错误
【单选题】 带传动不能保证准确的传动比,其原因是______。
①  带容易变形和磨损
②  带在带轮上出现打滑
③  带传动工作时发生弹性滑动
④  带的弹性变形不符合虎克定律
【单选题】 标准直齿圆柱齿轮不根切的最小齿数是____________。  
①  20  
②  17  
③  23  
④  30
【单选题】 凸轮机构中,基圆半径是指凸轮转动中心到______半径。
①  理论轮廓线上的最大
②  实际轮廓线上的最大
③  实际轮廓线上的最小
④  理论轮廓线上的最小
【单选题】 在正常条件下,滚动轴承的主要失效形式为______。
①  滚动体碎裂
②  滚动体与套圈间发生胶合
③  滚道磨损  
④  滚动体与滚道的工作表面疲劳点蚀
【单选题】 键联接主要用于______。
①  传递拉力
②  传递横向力
③  传递弯矩
④  传递扭矩
【单选题】 设计齿轮时,若发现重合度小于1,则修改设计时应______。
①  加大模数
②  增加齿数
③  加大中心距
④  增大压力角