【单选题】【消耗次数:1】
In this book the writer gives us a(n)____ picture of social history.
precise
exact
accurate
correct
参考答案:
复制
纠错
相关题目
【单选题】 ______ is not the representative writer in the Age of Realism in the literary history of the United States.
①  Henry James
②  Ezra Pound
③  William Dean Howells
④  Mark Twain
【单选题】 Televisions enable us to see things happen almost at the exact moment ____.
①  which they are happening
②  they are happening
③  which they happen
④  they have happened
【单选题】 Televisions enable us to see things happen almost at the exact moment _____.
①  which they are happening
②  they are happening
③  which they happen
④  they have happened
【单选题】 Televisions enable us to see things happen almost at the exact moment _____.
①  which they are happening
②  they are happening
③  which they happen
④  they have happened
【单选题】 The writer rushed his book into print. Here rush takes the [] meaning.
①  denotative
②  connotative
【单选题】 When we breathe, the oxygen in the air ____ with our blood and gives us life.
①  fills
②  goes
③  takes in
④  mixes
【单选题】 Our mother earth gives us ________we need in our daily life.
①  A. Everything
②  B.something
③  C.nothing
④  D.A.thing
【判断题】 An effective precis is based on precise and thorough reading and understanding of the article.
①  正确
②  错误
【单选题】 Which sentence is correct?
①  Afer finishing her composition, she took up the translation exercise.
②  Afer finishing her composition, the translation exercise was taken up.
【单选题】 Which sentence is correct?
①  Hurrying to the classroom, no one was there.
②  Hurrying to the classroom, she saw nobody there.
随机题目
【单选题】 粗基准选择时,若要保证某重要表面余量均匀,则应选择()
①  余量小的表面
②  该重要表面
③  半精加工之后
④  任意
【单选题】 先将工件在机床或夹具中定位,调整好刀具与定位元件的相对位置,并在一批零件的加工过程中保持该位置不变,以保证工件被加工尺寸的方法称为()。
①  调整法
②  试切法
③  自动控制法
④  定尺寸刀具法
【单选题】 车削螺纹时,产生螺距误差、影响误差大小的主要因素是()
①  主轴回转精度
②  导轨误差
③  传动链误差
④  测量误差
【单选题】 机床型号中“G”代表()。
①  割床
②  锯床
③  钻床
④  齿轮加工机床
【单选题】 在零件的加工过程中,更换刀具属于()时间。
①  休息与生理需要时间
②  辅助时间
③  布置工作地时间
④  基本时间
【单选题】 调整法加工一批工件后的尺寸符合正态分布,且分散中心与分差带中心重合,但发现有相当数量的工件超差,产生的原因主要是()
①  常值系统误差
②  随机误差
③  刀具磨损太大
④  调态误差大
【单选题】 布置在同一平面上的两个平行布置的条形支承板相当于的支承点数是()。
①  4
②  3
③  无数个
④  2
【单选题】 精基准属于()基准。
①  测量
②  装配
③  定位
④  工序
【单选题】 在基面内测量的角度有()。
①  主偏角和副偏角
②  刃倾角
③  后角
④  前角
【单选题】 在车床上加工某零件,先加工其一端,再调头加工另一端,这应是()。
①  两个工步
②  两个工序
③  两次安装
④  两个工位