【单选题】【消耗次数:1】
10. After a three-hour heated discussion, all the members in the jury reached the conclusions that the man was_________ of murder.
criminal
charged
guilty
faulty
参考答案:
复制
纠错
相关题目
【单选题】 He was such a ____ speaker that he held our attention every minute of the three-hour lecture.
①  specific
②  dynamic
③  heroic
④  diplomatic
【单选题】 The jury [] discussing the murder case at court.
①  is
②  are
【单选题】 The leakage of the concrete ( ) of the contract between the two corporations has aroused much concern and a heated discussion in local residents.
①  portions
②  divisions
③  fragments
④  details
【单选题】 It is ____ to fly an airplane at three thousand miles an hour.
①  possible
②  likely
③  maybe
④  probable
【单选题】 The young man struggled to _______ where he was at the time the murder took place.
①  reduce
②  respond
③  respond
④  recall
【单选题】 The young man struggled to _______ where he was at the time the murder took place.
①  reflect
②  respond
③  resolve
④  recall
【单选题】 10. I am not a violent man ____, but these insults were more than I could bear.
①  by birth
②  with birth
③  by nature
④  with nature
【单选题】 The old man returning home after eight years absence to find that all the neighbors he had known were no longer there. Is this a complete sentence?
①  Yes
②  No
【单选题】 After five hours’ drive, they reached ___________they thought was the place they’d been dreaming of.
①  that
②  where
③  which
④  what
【单选题】 Unless all the members agree to ____ to the plan there may be further development in the course of action.
①  tumble
②  stick
③  come
④  adjust
随机题目
【单选题】 8051单片机的堆栈是设置在空间。
①  程序存储器
②  内部数据存储器
③  SFR
④  外部数据存储器
【单选题】 堆栈是一个按后进先出规则存取数据的存储区,8051单片机的堆栈是。
①  向上生成的堆栈
②  向下生成的堆栈
③  向左生成的堆栈
④  向右生成的堆栈
【判断题】 因为RC串并联选频网络作为反馈网络时的=0°,单管共集放大电路的=0°,满足正弦波振荡的相位条件+=2nπ(n为整数),故合理连接它们可以构成正弦波振荡电路。()
①  正确
②  错误
【判断题】 幅度失真和相位失真总称为频率失真。
①  正确
②  错误
【多选题】 齿轮传动的形式有()
①  圆柱齿轮
②  圆锥齿轮
③  蜗杆与蜗轮
④  蜗杆
⑤  蜗轮
【多选题】 以下属于螺纹紧固件的有:()
①  螺栓
②  弹簧
③  垫圈
④  螺母
⑤  螺钉
【多选题】 根据国标GB/T14691-1993《技术制图字体》中规定的工程图样字体,关于字体高度及笔画宽度的描述正确的是()
①  字号指的是字体高度
②  汉字的高度不应小于5mm
③  字体高度有系列要求
④  字体笔划宽度统一为字高的1/10或1/14
⑤  4mm为字体高度公称尺寸系列中的一个
【多选题】 在国标GB/T14691-1993《技术制图字体》中规定的工程图样字体有()。
①  长仿宋体
②  短仿宋体
③  A型字母
④  手写体
⑤  B型数字
【多选题】 工程图样尺寸注法的基本规定中,以下描述正确的是()。
①  一个完整的尺寸由尺寸线、尺寸界线、尺寸数字和尺寸终端组成
②  标注尺寸时,应按机件的实际尺寸标注,与绘图比例无关
③  尺寸线的终端可以用箭头或斜线,特殊情况下可用圆点或细斜线代替箭头
④  尺寸数字按标准字体书写,同一张图上的字高要一致,一般为5号字
⑤  标注角度尺寸时,尺寸线应画成圆弧,角度的数字应一律写成水平方向
【多选题】 在下列的五组视图中,其正确的视图是()。