【单选题】【消耗次数:1】
The prices of the agricultural products have been ____ steadily in the past few years.
risen
raised
arisen
aroused
参考答案:
复制
纠错
相关题目
【判断题】 The past 22 years have really been amazing, and every prediction we’ve made about improvements have al come __true__
①  正确
②  错误
【判断题】 判断线上的内容是否正确:The past 22 years have really been amazing, and every prediction we’ve made about improvements have al come __true__
①  正确
②  错误
【判断题】 A: How have you been these years? B: Not too bad.
①  正确
②  错误
【单选题】 ______ for over 30years, we have great confidence in offering customers with premium products and services.
①  Being in the line
②  We will be in the line
③  To be in the line
④  Having been in the line
【单选题】 There have been few novels by revolutionaries free of those faults____ by Marx and Engels.
①  punished
②  blamed
③  criticized
④  scolded
【单选题】 Employment _______ in the past two years.
①  has gone up rapidly
②  went up rapidly
③  has risen steady
【单选题】 The engineers are going through with their highway project, ____the expenses have risen.
①  even though
②  just because
③  now that
④  as though
【单选题】 The big shot ______ several government officials in the past years.
①  buy out
②  buy up
③  buy off
④  buy down
【单选题】 Great changes __________ in our institute in the last few years.
①  have taken place
②  has taken place
③  took place
④  had taken place
【单选题】 The city ____ its birth-rate by almost 60% in the past 20 years.
①  cuts
②  has been cut
③  cut
④  has cut
随机题目
【单选题】 与D值法相比,反弯点法不考虑()
①  梁的线刚度
②  梁柱节点的水平位移
③  柱的线刚度
④  梁柱节点的转角
【单选题】 单层厂房排架预制柱基础的杯底厚度主要取决于()
①  柱截面长边尺寸
②  柱截面短边尺寸
③  基础埋置深度
④  地基承载力
【单选题】 在钢筋混凝土单向板中,分布钢筋的面积和间距应满足()
①  截面面积不小于受力钢筋面积的5%
②  截面面积不小于受力钢筋面积的10%
③  截面面积不小于受力钢筋面积的15%
④  截面面积不小于受力钢筋面积的20%
【单选题】 关于柱的反弯点,下列说法正确的是()
①  反弯点位于柱中弯矩为零处
②  反弯点位于柱中剪力为零处
③  反弯点位于柱高1/2处
④  反弯点位于层间水平侧移为零处
【单选题】 在水平力作用下,高层剪力墙结构的水平位移曲线一般为()
①  弯曲型
②  剪切型
③  弯剪型
④  剪弯型
【单选题】 单向板肋梁楼盖中横向抗侧刚度最大的梁布置形式是()
①  主梁纵向布置,次梁横向布置
②  主梁横向布置,次梁纵向布置
③  只设次梁,不设主梁
④  只设主梁,不设次梁
【单选题】 板截面的承载能力极限状态计算时,应遵循下述规定()。
①  受力钢筋宜采用I、II级或III级热轧钢筋
②  截面的弯矩调幅系数宜超过0.25
③  弯矩洞整后的截面受压区相对计算高度一般应超过0.35,但不应超过0.5
④  按弯矩调幅法计算的连续紧、板,可适当放宽裂缝宽度的要求
【单选题】 风荷载作用下,框架结构最大层间位移一般位于()
①  框架顶部
②  框架约2/3高度处
③  框架中部
④  框架底部
【单选题】 框架跨度是指()间的距离。()
①  定位轴线
②  底层柱轴线
③  顶层柱轴线
④  中间层柱轴线
【单选题】 在单板肋梁楼盖设计中,一般楼面板的最小厚度h可取为()
①  ≥50mm
②  ≥60mm
③  ≥80mm
④  没有限制