【单选题】【消耗次数:1】
There has been an atmosphere of ( ) around here for a few days now.
anticipation
greeting
knowledgw
knowing
参考答案:
复制
纠错
相关题目
【单选题】 This ATM has been out of service for a few days. It should ____ last week.
①  be fixed
②  have fixed
③  fix
④  have been fixed
【单选题】 This ATM has been out of service for a few days. It should ____ last week.
①  be fixed
②  have fixed
③  fix
④  have been fixed
【单选题】 This technology has been ?around for a long time, but not until recent years _______ it in marketing.
①  businesses employed
②  did businesses employ
③  businesses had employed?
④  had businesses employed
【单选题】 Johnnason: __________Cathy: Yes, our family moved in here only a few days ago. Johnnason: Welcome to the neighborhood.
①  Do you need any help?
②  Are you here for holidays?
③  Are you new here?
④  What are you doing here?
【单选题】 Johnnason: __________ .Cathy: Yes, our family moved in here only a few days ago. Johnnason: Welcome to the neighborhood.
①  Do you need any help?
②  Are you here for holidays?
③  Are you new here?
④  What are you doing here?
【单选题】 Now Mike isn’t here. He ________ Mr. Green’s. Perhaps he ________ back in a few minutes.
①  went to ; is coming
②  has gone to ; will come
③  has been to ; will be
④  is going to ; has come
【单选题】 Now Mike isn’t here. He _______ Mr. Green’s. Perhaps he _______back in a few minutes.
①  went to ; is coming
②  has gone to ; will come
③  has been to ; will be
④  is going to ; has come
【单选题】 He used to in a small village, but now he has been used to in the big city.
①  live, living
②  live, live
③  living, living
④  living, live.
【单选题】 10.Now Mike isn’t here. He _________ Mr. Green’s. Perhaps he _______ back in a few minutes.
①  went to; is coming
②  has gone to; will come
③  has been to ; will be
④  is going to; has come
【判断题】 Xiao Liu has worked in the plant for only a few days. He is a green hand at doing this job.划线部分应该翻译成“新手”
①  正确
②  错误
随机题目
【判断题】 零件机械加工工艺性分析是工艺规程设计的基础,也是制订工艺规程的一项重要工作,该说法( )
①  正确
②  错误
【单选题】 当工件两个加工表面之间的位置精度及他们自身尺寸、形状精度要求都很高时,则可采取两个加工表面互为基准的方法进行加工,该原则称为( )
①  自为基准原则
②  基准重合原则
③  互为基准原则
【单选题】 当某些表面精加工或光整加工工序要求加工余量小而均匀,在加工时就应尽量选择加工表面自身作为精基准,该原则称为( )
①  基准重合原则
②  基准统一原则
③  自为基准原则
【单选题】 ( )是加工过程中各个工序应保证的加工尺寸,其公差即为工序尺寸公差。
①  工序尺寸
②  工序公差
③  工序
【判断题】 单件大批生产,应尽量选用通用夹具和机床附近,该说法( )
①  正确
②  错误
【单选题】 生产任何一种机械产品,都要求在保证质量的前提下,做到高效率、高消耗,该说法( )
①  正确
②  错误
【判断题】 在机械加工中,由机床、夹具、刀具、工件等组成的系统,称为工件系统,该说法( )
①  正确
②  错误
【单选题】 所谓工序能力,就是工序处于稳定状态时,加工误差正常波动的范围,该说法( )
①  正确
②  错误
【单选题】 机械加工中的自激振动是在没有周期性外力干扰下所产生的振动运动,这一点与强迫振动有形似处,该说法( )
①  正确
②  错误
【单选题】 由振动系统自身产生的交变力激发和维持的一种周期性振动称为( )
①  自由振动
②  自激振动
③  强迫振动