【单选题】【消耗次数:1】
You can’t really appreciate foreign () in translation
literature
literate
literary
literacy
参考答案:
复制
纠错
相关题目
【单选题】 I really appreciate ____ to help me, but I am sure that I can manage by myself.
①  you to offer
②  that you offer
③  your offering
④  that you are offering
【单选题】 8.Do you have any idea what he meant? I really can’t ______ what he said at this morning’s meeting.
①  figure on
②  figure out
③  find out
④  find
【单选题】 Sorry, I can’t find the books you asked for.____________
①  Don’t mention it.
②  It’s your fault.
③  Thanks anyway.
④  I won’t forgive you.
【单选题】 You can’t be too careful while driving!
①  [A]开车要特别小心!
②  [B]开车不能太小心!
③  [C]你开车时不得不小心翼翼!
④  [D]你开车要小心,但切忌谨小慎微!
【单选题】 We really appreciate our working environment, in -- --- there was open, friendly workplace communication.
①  how
②  what
③  whom
④  which
【单选题】 As I will be away for at least a year,Id appreciate________from you now and then so that I can know how everyone is getting along.
①  having heard
②  to hear
③  hearing
④  being heard
【单选题】 The bosses give them low wages, because it is expected that you will ( ). If you don’t, the service person can’t earn a living.
①  make up the different
②  make up the difference
③  make out the difference
④  make out the different
【单选题】 16. As I will be away for at least a year, I’d appreciate____ from you now and then so that I can know how everyone is getting along.
①  having heard
②  to hear
③  hearing
④  beingheard
【单选题】 12.You can’t imagine what great trouble they have ____the problem____.
①  to solve; being talked about
②  solving; discussing
③  to solve; to talk about
④  solving; being discussed
【多选题】 You speak ____________ you had really been there.
①  as soon as
②  as many as
③  as if
④  as though
随机题目
【单选题】 在正常条件下,滚动轴承的主要失效形式为______。
①  滚动体碎裂
②  滚动体与套圈间发生胶合
③  滚道磨损  
④  滚动体与滚道的工作表面疲劳点蚀
【单选题】 键联接主要用于______。
①  传递拉力
②  传递横向力
③  传递弯矩
④  传递扭矩
【单选题】 设计齿轮时,若发现重合度小于1,则修改设计时应______。
①  加大模数
②  增加齿数
③  加大中心距
④  增大压力角
【单选题】 我国标准规定分度圆上齿廓的压力角α=______。  
①  10°  
②  0°  
③  20°  
④  15°
【单选题】 用于联接的螺纹牙型为三角形,这是因为三角形螺纹______。
①  牙根强度高,自锁性能好
②  传动效率高
③  防震性能好
④  自锁性能差
【单选题】 工作时既承受弯矩又传递转矩的轴称为______。
①  心轴
②  转轴
③  传动轴
④  不确定
【单选题】 设计V带传动,限制带轮最小直径是为了限制____________。
①  小轮包角α
②  带的弯曲应力
③  带的长度
④  以上皆不是
【单选题】 一对相啮合的齿轮,其____________大小相等。
①  弯曲应力
②  许用弯曲应力
③  齿面接触应力
④  许用接触应力
【单选题】 滚动轴承的基本额定寿命是指______的轴承发生点蚀,______的轴承未发生点蚀破坏前的总转数或工作小时数。
①  5%,95%
②  10%,90%
③  20%,80%
④  50%,50
【单选题】 拟将曲柄摇杆机构改为双摇杆机构,应取原机构中的______作为机架。  
①  曲柄  
②  连杆  
③  摇杆  
④  机架