【单选题】【消耗次数:1】
The audience waited in _____silence while their aged speaker searched among his note for the figures he could not remember.
respective
respect
respectful
respectable
参考答案:
复制
纠错
相关题目
【单选题】 31. The professor said he could talk on _____ interested the audience.
①  anytopic
②  whichtopic
③  whichevertopic
④  thetopichethoughtit
【单选题】 Keeping eye contact ______ respect for the interviewer and your audience.
①  says
②  pays
③  throws
④  shows
【单选题】 The speaker, _______ for her splendid speeches, was warmly received by the audience.
①  having known
②  being known
③  knowing
④  known
【单选题】 ______stole his camera while he is lying on the beach.
①  Anyone
②  Someone
③  Everyone
④  No one
【单选题】 _______ the look on his face, he doesn’t t quite understand what the speaker is saying.
①  Judge by
②  Judging by
③  To judge by
④  To be judged by
【单选题】 His decision was ____, since he could not see the action from where he was standing.
①  arbitrary
②  ordinary
③  casual
④  accurate
【单选题】 A good public speaker can _______ the audience (听众)at the very beginning.
①  convey
②  portray
③  exaggerate
④  hook
【单选题】 Sandy could do nothing but _______ to his teacher that he was wrong.
①  admit
②  admitted
③  admitting
④  to admit
【单选题】 His mother had talked to him for two hours while he was watching TV, but_____.
①  a little did he hear
②  little did he hear
③  little heard he
④  a little heard he
【判断题】 Audience is the only factor that a speaker/writer needs to consider when making a choice of words.
①  正确
②  错误
随机题目
【判断题】 绿色建材评价指标体系分为控制项、评分项(100 分)、加分项(100分)。
① 
② 
【单选题】 可用于开环伺服控制的电动机是()
①  交流主轴电动机
②  永磁宽调速直流电动机.
③  无刷直流电动机
④  功率步进电动机
【单选题】 数控机床中,所有控制信号都是由()发出的。
①  控制介质
②  数控装置
③  伺服驱动装置
④  数控程序
【单选题】 G02X20Y20R-10F100;所加工的一般是()。
①  整圆
②  夹角180°的顺时针圆弧
③  180o〈夹角〈360°的逆时针圆弧
④  180o〈夹角〈360°的顺时针圆弧
【单选题】 在给定圆弧半径和弦线误差极限的情况下,插补周期越短,进给速度()。
①  越低
②  越高
③  不变
④  与加工精度有关
【单选题】 在开环系统中常采用()和时钟中断法对进给速度进行控制。
①  前加减速控制
②  后加减速控制
③  程序计时法
④  循环扫描法
【单选题】 PWM是脉冲宽度调制的缩写,PWM调速单元是指()
①  晶闸管相控整流器速度控制单元
②  直流伺服电机及其速度检测单元
③  大功率晶体管斩波器速度控制单元
④  感应电动机变频调速系统
【单选题】 在()系统中,进给速度的计算方法是采用数据采样方法进行插补加工,进给速度的计算是根据编程速度F值,将被加工零件轮廓曲线分割为采样周期的轮廓步长。
①  闭环
②  半闭环
③  开环
④  闭环和半闭环
【单选题】 感应同步器是一种()位置检测元件。
①  光学式
②  电磁式
③  数字式
④  增量式
【单选题】 一五相混合式步进电动机,转子齿数为100,当五相十拍运行时,其步距角为()
①  0.36°
②  0.72°
③  0.75°
④  1.5°