【单选题】【消耗次数:1】
为了防止管子与管板连接处产生不同程度的泄漏,应采用( )。
椭圆管板
薄管板
平管板
双管板
参考答案:
复制
纠错
相关题目
【单选题】 板式连接及时将系统中所需要的板式标准液压元件统一安装在连接板上,采用的连接板有:单层连接板、双层连接板、多层连接板。该说法( )
①  正确
②  错误
【单选题】 列管式固定管板热交换器设有折流板,其主要作用是( )。
①  减小水流对管束的冲刷磨损
②  降低流速
③  增强湍流程度
④  对管束不起支撑作用
【单选题】 交流发电机中装在元件板上的二极管( )。
①  是正极管
②  是负极管
③  既可以是正极管也可以是负极管
【单选题】 板式连接及时将系统中所需要的板式标准液压元件统一安装在连接板上,采用的连接板有以下哪几种形式( )
①  以上选项全正确
②  单层连接板
③  双层连接板
④  整体连接板
【单选题】 单向板()
①  是四边支承、荷载主要沿短边传递的板
②  是四边支承(长边l2,短边l1)l2/l12的板
③  与支承条件无关
④  按单向板计算就是单向板
【判断题】 流量计是由带圆孔的板和U管压差计组成,将孔板放到需要测量流量的管道中,当流体流过孔板时,由于截面积减小,流速增大。( )
①  正确
②  错误
【单选题】 与板连接为一体的大截面梁,施工缝应留在板底面以下()。
①  20~30mm
②  10~20mm
③  30~40mm
【单选题】 悬挑空调板的受力钢筋应布置在板的()。
①  上部
②  中部
③  底部
④  端部
【单选题】 板按图示面积乘以板厚以()。
①  平方米
②  立方米
③  平方厘米
④  厘米
【单选题】 为了提高板的刚度,通常在板的两端设置()封闭。
①  中勒
②  劲肋
③  变肋
④  端肋
随机题目
【简答题】 传媒业经营的基本路径包括:集约化、专业化、[填空1]。
【简答题】 新闻改革的基本特点一是从自发走向自觉,中央掌握改革主导权;二是[填空1]三是从边缘突破走向中心突破,新闻报道成为新闻改革的主攻目标;四是从增量改革走向盘活存量。
【简答题】 中国新闻媒介的走势在制度架构层面是从人治走向[填空1]。
【简答题】 Translate the following sentence into Chinese.2. The Greens is very kind to us.
【简答题】 Translate the following sentence into English.我认为花任何代价做那件事情都是值得的。
【简答题】 Direction: Fill in the blanks with the wordsor phrasesgiven below. Change the form if necessary.[toddler; lottery; claim; retract; turn down; somehow; in reality; gamble; publicity; inculcate]6.[填空1], the operation will end before its start without these preparations.
【简答题】 Direction: Fill in the blanks with the words given below. Change the form if necessary.[privilege; component; stagnant; entangle; superficial; arresting; expound; penetrating; indulge; click]7. The speaker has an hour to[填空1]his views to the public.
【简答题】 Direction: Fill in the blank with the correct form of the word given.1. Before liberation he could hardly live on his[填空1](wage).
【简答题】 Direction: Fill in the blanks with the wordsor phrasesgiven below. Change the form if necessary.[toddler; lottery; claim; retract; turn down; somehow; in reality; gamble; publicity; inculcate]7.[填空1]Karin managed to cope with the demands of her career.
【简答题】 完整的文件名是由主文件名和[填空1]两部分。